Megaraid Manager Objects Menu - LSI SCSI 320-0 Configuration

MegaRAID Manager Objects Menu

Objects Choose the Objects option from the MegaRAID Manager main menu to access
the controllers, logical drives, physical drives, and SCSI channels individually,
along with the battery backup. You can also change certain settings for each
object. The Objects menu options are described below.
Adapter Choose the Adapter option from the Objects menu to select a MegaRAID
controller if your computer has more than one and to modify parameters. You
can install only one MegaRAID controller, but you can install other MegaRAID
controllers in the computer.
Option
Clear
Configuration
View Adapter
Performance
FlexRAID
PowerFail
Disk Spin up
Timings
Alarm Control
View/Update
Parameters
Adapter Type
Description
Choose this option to erase the current configuration from the
controller non-volatile memory.
This option is not yet supported.
Choose this option to allow drive reconstruction to continue when
the system restarts if a power failure occurs. This will reduce the
size of the logical drive by (1 MB times the number of drives in
the logical drive).
Choose this option to set the method and timing for spinning up
the hard disk drives in the computer.
Choose this option to enable, disable, or silence the onboard
alarm tone generator.
Choose this option to display the firmware version number and
the cache memory size. In addition, you can change the rebuild
rate for the adapter through this option.
Displays the type of adapter used. The adapter can be customized.
Cont'd
Chapter 4 MegaRAID Manager
59