LSI SCSI 320-0 Configuration page 68

MegaRAID Manager Objects Menu,
Logical Drive Choose this option from the Objects menu to select a logical drive and to
perform the listed actions.
Logical Drive
Options
Initialize Choose this option to initialize the selected logical drive. This
should be done for every logical drive you configure.
Check Choose this option to verify the correctness of the redundancy data
Consistency in the selected logical drive. This option is available only if RAID
level 1, 3, or 5 is used. MegaRAID automatically corrects any
differences found in the data.
View/Update Choose this option to display the properties of the selected logical
Parameters drive; you can modify the cache write policy, the cache read
policy, virtual sizing, and the I/O policy from this menu. Set the
virtual sizing option to Enabled before adding a physical drive to a
logical drive. After you have created a logical drive set, the
partition of the drive should be as large as the virtual size of the
logical drive.
Physical Drive Choose this option from the Objects menu to select a physical device and to
perform the operations listed below. When you choose this option, the physical
drives in the computer are listed. Move the cursor to the desired device and
press <Enter>. The following appears:
Physical Drive Menu
Physical Drive
Options
Rebuild Choose this option to rebuild the selected disk drive.
Format Choose this option to low-level format the selected hard disk drive.
Make Online Choose this option to change the state of the selected hard disk drive to
Online.
Fail Drive Choose this option to change the state of the selected disk drive to Fail.
Make HotSpare Choose this option to designate the selected disk drive as a hot spare.
View Drive Choose this option to see the manufacturer data for the selected physical
Information device.
View Rebuild Choose this option to see the progress of the rebuild process for the selected
Progress disk drive.
MegaRAID Configuration Software Guide
60
Continued
Description
Description
Cont'd