Megaraid Manager Check Consistency Menu - LSI SCSI 320-0 Configuration

MegaRAID Manager Check Consistency Menu

Check Consistency Choose this option to verify the redundancy data in logical drives using
RAID levels 1, 3, or 5. When you choose Check Consistency, the parameters of
the existing logical drives on the current controller appear. The logical drives are
listed by number. MegaRAID automatically corrects any differences found in
the data.
Press the arrow keys to select the desired logical drives. Press the spacebar to
select or deselect a drive for consistency checking. Press <F2> to select or
deselect all the logical drives.
Press <F10> to begin the consistency check. A progress indicator for each
selected logical drive appears, as shown below:
When the consistency check is finished, press any key to clear the progress
display and press <Esc> to display the main menu.
Chapter 4 MegaRAID Manager
63