Scan Devices; Scsi Channel Properties - LSI SCSI 320-0 Configuration

Scan Devices

When you select the Scan Devices option, WebBIOS checks the physical and
logical drives to see if there are any changes to the drive status. It displays the
results of the scan on the main screen in the physical and logical drives section.
For example, if a physical drive has failed, the words "Not Responding" display
to the right of the drive name under the Physical Drives heading.

SCSI Channel Properties

A screen such as the following appears when you select SCSI Channel
Properties from the MegaRAID WebBIOS main screen:
Properties The SCSI channel properties under the Properties heading are:
Option
Channel Width
Termination
SCSI Capabilities
MegaRAID Configuration Software Guide
40
Description
Displays the number of bits that can pass through the channel
at one time.
Use this option to enable or disable SCSI termination.
Use this option to select Fast, Ultra,Ultra III, or 160M as the
SCSI capability.
Cont'd