LSI SCSI 320-0 Configuration page 69

MegaRAID Manager Objects Menu,
SCSI Channel Choose this option from the Objects menu to select a SCSI channel on the
currently selected controller. You can perform the following operations on the
selected channel.
Channel Options
Termination Status
Activate Channel
Terminate High 8
Bits
Terminate Wide
Channel
Disable Termination
View Parameters
Battery Backup Choose this option from the Objects menu to view or update parameters for the
battery backup module.
Continued
Description
Choose this option to change the type of termination.
Choose this option to activate the selected channel. Be sure
that TermPWR is provided for all active channels.
Choose this option to enable termination on the selected
channel for the upper eight bits and disable termination on
the controller for the lower eight bits. This setting is
required if the selected SCSI channel is terminated with 8-
bit devices at both ends.
Choose this option to enable Wide termination for the
selected channel. This is required if the MegaRAID
controller is at one end of the SCSI bus for the selected
channel.
Choose this option to disable termination on the
MegaRAID controller for the selected channel. This option
should be used if the selected SCSI channel is terminated
with Wide devices at both ends.
Choose this option to view the termination and active status
of the selected channel.
Chapter 4 MegaRAID Manager
61