Webbios Configuration Utility - LSI SCSI 320-0 Configuration

3

WebBIOS Configuration Utility

The WebBIOS Configuration Utility is ROM-based and is available only on the
following controllers:
•
Elite 1600 (Series 493)
•
Enterprise 1500 (Series 467)
•
Enterprise 1600 (Series 471)
•
Express 300 (Series 490)
•
Express 500 (Series 475)
You can use this utility in place of or in conjunction with the <Ctrl> <M> BIOS
configuration utility. It has a graphical user interface and makes full use of the
mouse.
Features The MegaRAID WebBIOS Configuration Utility configures disk arrays and
logical drives. Because the utility resides in the MegaRAID BIOS, its operation
is independent of the operating systems on your computer. The WebBIOS utility
can be used to:
•
display adapter properties
•
scan devices
•
display SCSI channel properties
•
define logical drives
•
display logical drive properties
•
initialize logical drives
•
check data for consistency
•
configure physical arrays
• select adapters
• display the physical properties
You can use the Configuration Wizard to guide you through the steps required
for configuration of the logical drives and physical arrays.
Chapter 3 WebBIOS Configuration Utility
35