A Megaraid Service Monitor - LSI SCSI 320-0 Configuration

A MegaRAID Service Monitor
Power Console Plus does not run as a Windows NT Service. The MegaRAID
Service Monitor runs as a Windows NT service. It logs events to the Application
log (MEGARAID.LOG) under Windows NT.
Power Console Plus Internal Messages Power Console Plus logs the following messages to
RAID.LOG:
Message
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
Message
Power Console Plus has been started again.
An adapter change has occurred.
Notify messages:
•
drive state change
•
start a reconstruction
•
enclosure alert
•
etc.
Begin any operation (initialize, rebuild, etc.) on any physical or
logical drive.
An error occurred during an operation (initialize, rebuild, etc.)
on a physical or logical drive.
Complete any operation (initialize, rebuild, etc.) on any physical
or logical drive.
Successfully abort any operation (initialize, rebuild, etc.) on any
physical or logical drive.
An error occurred while attempting to abort any operation
(initialize, rebuild, etc.) on any physical or logical drive.
Failure to start any operation (such as an initialize) on a logical
drive.
Drive state change for any channel and target.
Configuration file written.
SCSI sense data.
Battery status.
Appendix A MegaRAID Service Monitor
137