LSI SCSI 320-0 Configuration page 28

Using Easy Configuration,
Step
4 Press <Enter> when you are finished creating the current array. The logical drive
configuration screen appears.
The window from the top of the screen shows the logical drive that is currently being
configured as well as any existing logical drives. The column headings are:
LD
RAID
Size
#Stripes
StrpSz
DriveState
5 Set the RAID level for the logical drive. Highlight RAID and press <Enter>. The available
RAID levels for the current logical drive are displayed. Select a RAID level and press
<Enter> to confirm. See the MegaRAID Hardware Guide for your board for an
explanation of the RAID levels.
MegaRAID Configuration Software Guide
20
Continued
Action
The logical drive number
The RAID level
The logical drive size
The number of stripes (physical drives) in the associated physical
array
The stripe size
The state of the logical drive
Cont'd