Adapter Menu - LSI SCSI 320-0 Configuration

Adapter Menu

The Power Console Plus Adapter menu is shown below:
Adapter Options The options on the Adapter menu are described below.
Option
Update Choose this option to download a new version of the MegaRAID firmware.
Firmware This option may not be available.
Flush Cache Select this option to force the MegaRAID controller to send the contents of
cache memory to the logical drives.
Performance Select this option to display a graphical representation of the performance of a
Monitor On/Off logical drive. You can select a bar graph or a line graph. This option can only
turn this feature on or off.
Properties Select this option to display the adapter properties, including the firmware
and BIOS versions, the rebuild rate, cache memory size, and SCSI
specification type.
Diagnostics This option is not yet available.
Rebuild Rate Choose this option to change the rate at which drives are rebuilt. See page
111 for additional information about rebuilds.
Rescan Select this option to scan the SCSI channels again.
View Log Select this option to display a MegaRAID event log.
Enclosure To view the fan temperature, and voltage information for the enclosure
Management cabinet, the cabinet must support SAF-TE.
Alarm Control Select this option to enable or disable the system alarm when a drive failure
occurs.
Description
Chapter 6 Running Power Console Plus
Cont'd
109