Step
9
If you have not edited the HOST file yet, edit HOST in
c:\winnt\system32\drivers\etc using the Notepad program. HOST should look
like this:
The HOSTS file information varies depending on the type of installation:
Enter the IP address and name of all MegaRAID servers including the
registration server.
Example:
Specify all Sequential IP addresses for the server or servers, and the
workstation. For example:
123.123.234.1
123.123.234.2
123.123.234.3
All specified systems must conform to the TCP/IP specification for address
structures.
Press <Enter> after typing all names of the servers. If you do not,
Notepad will not enter the information.
10
Save the file and exit. The following message displays. Reboot your system
for Power Console Plus to take effect.
MegaRAID Configuration Software Guide
92
Action
Server A
Server B
Workstation C
.