LSI SCSI 320-0 Configuration page 14

Starting MegaRAID Configuration Utility,
When you press <Ctrl> <M>, the following appears:
Configuration Utility Menu Options The Configuration Utility menu options:
Option
Configure Choose this option to configure physical arrays and logical drives.
Initialize Choose this option to initialize one or more logical drives.
Objects Choose this option to individually access controllers, logical drives,
and physical drives.
Format Choose this option to low-level format hard disk drives.
Rebuild Choose this option to rebuild failed disk drives.
Check Choose this option to verify that the redundancy data in logical
Consistency drives using RAID level 1, 3, or 5 is correct.
Select Choose this option to select a MegaRAID host adapter to work on.
Adapter This menu item appears only if more than one MegaRAID host
adapter is installed in the computer.
If Using MegaRAID Configuration Utility
configure arrays and logical drives
initialize logical drives
format a disk drive
rebuild a disk drive
use a pre-loaded SCSI drive as-is
For information about other functions, see the following menu tree and menu
descriptions.
MegaRAID Configuration Software Guide
6
Description
To... Use this menu
Configure
Initialize
Format
Rebuild
Configure
Continued
turn to...
page 16
page 29
page 31
page 32
page 33