Installing An Lsi Logic Snmp Agent - LSI SCSI 320-0 Configuration
Raid controller
Hide thumbs
Also See for SCSI 320-0:
- Hardware manual (100 pages) ,
- Product manual (16 pages) ,
- Quick hardware setup manual (2 pages)
Table of Contents
Advertisement
Installing an LSI Logic SNMP Agent
The following installs the LSI Logic SNMP agent on a system running Windows
NT 4.x Server and Workstation.
SNMP Installation Prerequisites You must be running Windows NT v4.x or Windows 2000 in
the system where SNMP will be installed. The LAN cards must be configured
with TCP/IP. Ping all IP addresses to make sure the connections are good.
Installing SNMP Services in Windows NT 4.x The following instructions install SNMP Services
and verification of SNMP Services operation for Windows NT 4.x. SNMP
Services must be installed before the LSI Logic SNMP agent will work
properly.
Step
1
Select Settings, Control Panel, and then Services from the Windows NT
Start button. In Services, use the scrollbar to locate SNMP Services.
2
If SNMP TRAP SERVICES is set to –Started Automatic, go to SNMP
installation on the Power Console Plus installation CD. If you do not find
SNMP TRAP SERVICES listed, go to step 3.
3
From the Windows NT Start button, Select Settings, Control Panel, and
then Network. Select Services from the Network workgroup.
4
Select the Add button. Scroll down and select SNMP Services.
5
Select OK. Insert the Windows NT CD as prompted.
6
After the files have transferred from the CD, select the Agent tab. Edit:
Contact Name:
Location:
7
Select the Traps tab. Edit:
Community Name: Enter "PUBLIC" or desired name.
Trap Destination: Enter the IP address of the Server where HP Open
8
The Security Tab can remain at default. Reboot the system.
9
After reboot, go to step 1 for verification of SNMP Services installation.
Installation of SNMP Agent
Step
1
Insert the first Power Console Plus CD in the CD-ROM drive. Click on
Start, click on Run, and choose Browse for the CD-ROM drive. Select
SETUP.EXE from Power Console Plus installation CD and click on OK.
2
Select SNMP from the menu. The SNMP agent is now installed.
MegaRAID Configuration Software Guide
94
Action
Enter the computer user name
Enter the IP address of your server
View is installed.
Action
Advertisement
Table of Contents
