Using Easy Configuration,
Step
7
When you have defined the current logical drive, choose Accept and press <Enter>. The
array selection screen appears if any unconfigured disk drives remain.
8
Repeat steps 3 through 7 to configure another array and logical drive. MegaRAID supports
up to 40 logical drives per controller. If you are finished configuring logical drives, press
<Esc> to exit Easy Configuration. A list of the currently configured logical drives appears:
After you respond to the Save prompt, the Configure menu appears.
9
Initialize the logical drives you have just configured. See Initializing Logical Drives on
page 29.
MegaRAID Configuration Software Guide
22
Continued
Action