LSI SCSI 320-0 Configuration page 105

Installing and Registering Power Console Plus Components in a
NetWare Server,
Continued
Edit the Hosts File for a RAID Registration Server Use the following procedure if installing
Power Console Plus on a server that is the registration server.
Step
1 Type
LOAD EDIT
at the NetWare prompt and press <Enter>.
2 Press the <Ins> key and select SYS volume. Select the ETC directory.
Select the Hosts file and press <Enter>.
3 Add the TCP/IP addresses and names of all servers that are registering into
the registration server.
4 Add the TCP/IP address and name of the registration server (the server you
are currently working on.)
Edit REGSERV.DAT for a RAID Server or Registration Server
Step
1 Type
LOAD EDIT
at the NetWare prompt and press <Enter>.
2 Press the <Ins> key and select SYS volume. Select the ETC directory.
Select the REGSERV.DAT file and press <Enter>.
3 Add the name of the registration server (the server you are currently
working on.)
Action
Action
Chapter 5 Installing Power Console Plus
97