LSI SCSI 320-0 Configuration page 134

Step 3 Run the Wizard,
Custom Configuration, Cont'd
Click on the Accept Array button when the configuration is complete. A new
Finishing
array screen appears. Assign physical drives as discussed above. When finished,
click on the Next button.
Defining Logical Drives The Logical Drive Parameter screen appears next, as shown below:
This screen displays the logical drive(s) to be defined. You can specify the
RAID level and size. You can also span arrays and set advanced parameters.
In the Logical Drive window, all arrays on the current adapter and the global hot
spare pool are displayed. The logical drives are labeled as New or LD0, LD1,
LD2, LD3, LD4, LD5, LD6, or LD7.
Define Logical Drives Define all logical drives to be configured in the new array. Do not create
drives that span the current array and another array. Make sure the Span Array
box is not checked.
MegaRAID Configuration Software Guide
126
Continued
Cont'd