Starting the MegaRAID WebBIOS Utility on the Host Computer
When the host computer boots, hold the <Ctrl> key and press the <H> key when
the following appears:
Copyright© AMERICAN MEGATRENDS,INC.
Press <Ctrl><M> to Run Configuration Utility
Or press <Ctrl><H> for WebBIOS
Main Screen
When you press <Ctrl> <H> on the host computer, the following displays, as
shown below. The main screen displays a menu of items that you can select to
display information and make changes to the RAID arrays on the remote server.
The screen also displays the current configuration of the physical and logical
drives. From this screen, you can configure and manage the RAID arrays on the
remote server.
Note:
If there are multiple adapters, WebBIOS starts from the Adapter Selection
screen. For information about the Adapter Selection screen, see page 51.
Chapter 3 WebBIOS Configuration Utility
37