Using Easy Configuration - LSI SCSI 320-0 Configuration

Using Easy Configuration

In Easy Configuration, each array is associated with exactly one logical drive.
Follow the steps below to create arrays using Easy Configuration:
Step
1 Choose Configure from the MegaRAID Manager main menu.
2 Choose Easy Configuration from the Configure menu. The array selection menu appears:
The hot key information appears at the bottom of the screen. The hot key functions are:
<F2> Display the manufacturer data and MegaRAID error
count for the selected drive.
<F3> Display the logical drives that have been configured.
<F4> Designate the selected drive as a hot spare.
3 Press the arrow keys to select specific physical drives. Press the spacebar to associate the
selected physical drive with the current array. The indicator for the selected drive changes
from READY to ONLIN A[array number]-[drive number]. For example, ONLIN A2-3
means disk drive 3 in array 2.
Add physical drives to the current array as desired. Try to use drives of the same capacity
in a specific array. If you use drives with different capacities in an array, all the drives in
the array is treated as though they have the capacity of the smallest drive in the array.
The number of physical drives in a specific array determine the RAID levels that can be
implemented with the array.
RAID 0 requires one or more physical drives.
RAID 1 requires 2 physical drives.
RAID 3 requires at least three physical drives.
RAID 5 requires at least three physical drives.
Action
Chapter 4 MegaRAID Manager
Cont'd
69