LSI SCSI 320-0 Configuration page 7

Preface,
Continued
Disclaimer This manual describes the operation of the LSI Logic Corporation MegaRAID Disk
Array Controller. Although efforts have been made to assure the accuracy of the
information contained here, LSI Logic Corporation expressly disclaims liability for any
error in this information, and for damages, whether direct, indirect, special, exemplary,
consequential or otherwise, that may result from such error, including but not limited to
the loss of profits resulting from the use or misuse of the manual or information
contained therein (even if LSI Logic Corporation has been advised of the possibility of
such damages). Any questions or comments regarding this document or its contents
should be addressed to LSI Logic Corporation from the address shown on the cover.
LSI Logic Corporation provides this publication "as is" without warranty of any kind,
either expressed or implied, including, but not limited to, the implied warranties of
merchantability or fitness for a specific purpose.
Some states do not allow disclaimer of express or implied warranties or the limitation or
exclusion of liability for indirect, special, exemplary, incidental or consequential
damages in certain transactions; therefore, this statement may not apply to you. Also, you
may have other rights which vary from jurisdiction to jurisdiction.
This publication could include technical inaccuracies or typographical errors. Changes
are periodically made to the information herein; these changes will be incorporated in
new editions of the publication. LSI Logic Corporation may make improvements and/or
revisions in the product(s) and/or the program(s) described in this publication at any time.
Requests for technical information about LSI Logic Corporation products should be made
to your LSI Logic Corporation authorized reseller or marketing representative.
vii