Step 4 Save Configuration And Initialize - LSI SCSI 320-0 Configuration

Step 4 Save Configuration and Initialize

Save Configuration Click on OK when prompted to save the configuration. The configuration is
saved to NVRAM and to the array.
Save to Binary File The configuration parameters have been saved to NVRAM, but it is also a
good idea to save the configuration to a binary file. Choose Save from the Power
Console Plus Configuration menu. Type a filename and directory path for the
Save file. The file extension should be .CFG. Click on the Read Only checkbox
to make the binary file read-only. Click on OK when prompted to save the file.
Print the Configuration Print the configuration by choosing Print from the Power Console Plus
Configuration menu. Keep a copy of the configuration for your records. This is
important if you ever need to call
replace a failed adapter.
Initialize Logical Drives Select the correct adapter from the Adapter box. Select the logical drives
to be initialized. Choose Initialize from the Logical Drive menu.
The Initialize screen has a separate window for each logical drive. There is a bar
graph that displays the progress of the initialization for each logical drive.
Click on Abort if you must stop the initialization.
Repeat this process for each adapter in the system.
Check Rebuild Rate Choose the correct adapter from the Adapter box. Choose Rebuild Rate
from the Adapter menu. You can change the rate by clicking on the slider and
moving it right or left.
If there is more than one adapter in the system, click on each adapter and check
the rebuild rate.
The rebuild rate is not affected when you clear the configuration.
Exit Power Console Plus Choose Exit from the Configuration menu to quit Power Console Plus.
MegaRAID Configuration Software Guide
128
Technical Support or
LSI Logic Corporation