LSI SCSI 320-0 Configuration page 121

Adapter Menu,
Continued
Enclosure Management Icons The status of the power supply, fans, and temperature for SAF-
TE compliant subsystems appears when you click on one of the icons:
Icon
Alarm Control The alarm generates a beeping sound when one or more disks fail. The sound
continues until Silence Alarm is selected. After a rebuild finishes, a beep signals
that the rebuild is done. Choose Silence Alarm at this time to silence the alarm.
The alarm settings are:
Setting
Enable/ Enables the alarm. If Disable Alarm appears, the alarm is enabled. If Enable Alarm
Disable appears, the alarm is disabled. When Enable Alarm is set, a beeping sound occurs
Alarm even when all logical drives are online and there are no failed disks after a hot spare
rebuild completes. Use the Silence Alarm function to stop the alarm. The normal
setting should be Enable Alarm.
Silence Stops the alarm if it is currently beeping. If the alarm is not beeping, it has no effect.
Alarm There is no normal setting. It acts as a temporary switch.
Description
Displays the current status of the power supply in the
enclosure for the selected subsystem.
Displays the current status of the cooling fans in the
enclosure for the selected subsystem.
Displays the current temperature of the enclosure for the
selected subsystem.
Description
Chapter 6 Running Power Console Plus
113