Configuration Utility Initialize Menu - LSI SCSI 320-0 Configuration

Configuration Utility Configure Menu
Configure Choose the Configure option to select a method for configuring arrays and
logical drives.
Option
Easy Configuration
New Configuration
View/Add
Configuration
Clear Configuration

Configuration Utility Initialize Menu

Initialize Choose this option from the Configuration Utility main menu to initialize one or
more logical drives. This action typically follows the configuration of a new
logical drive. See page 29 for additional information.
Initializing a logical drive destroys all data on the logical drive.
MegaRAID Configuration Software Guide
10
Description
Select this method to perform a basic logical drive
configuration where every physical array you define is
automatically associated with exactly one logical drive.
See page 17 for additional information.
Select this method to discard the existing configuration
information and to configure new arrays and logical
drives. In addition to providing the basic logical drive
configuration functions, New Configuration allows you
to associate logical drives with multiple or partial arrays.
See page 17 for additional information.
Select this method to examine the existing configuration
and/or to specify additional arrays and logical drives.
View/Add Configuration provides the same functions
available in New Configuration. See page 17 for
additional information.
Select this option to erase the current configuration
information from the MegaRAID controller non-volatile
memory.
Warning