LSI SCSI 320-0 Configuration page 132

Step 3 Run the Wizard,
Displaying Logical Drive Properties To display the logical drive properties, double-click on the
logical drive icon.
Displaying Physical Drive Properties To display the physical drive properties, double-click on
the drive icon.
Custom Configuration If you choose Custom Configuration, the Array Definition Screen
appears, as shown below:
The new array is displayed in the Logical Devices window. The drive SCSI ID
follows the drive icons. The current adapter with all arrays, logical drives, and
hot spares, is shown in the Logical Devices window. Each logical drive has a
label (such as LD 0), the RAID level, and the drive capacity. Spanned arrays
have hyphenated array numbers (for example: LD0-1).
MegaRAID Configuration Software Guide
124
Continued
Cont'd