Configuration Menu,
Custom Configuration If you choose Custom, you can determine the configuration. Select
Custom, and click <Next>. A screen such as the following screen displays:
Highlight the drives you want to configure and click on Add to Array to add
drives to the configuring array. You cannot add a drive to an existing array
while running the Configuration Wizard.
Click on Add Spare to add Hot Spare drives.
Click on Accept Array if you approve of the configuration.
Click on Reclaim to clear the last configured array.
Click on Next to accept the configuration. Follow the instructions on the screen
to complete the RAID configuration process.
Display
Choose this option to display the current RAID system configuration.
Print
Choose this option to print the current RAID system configuration.
Continued
Chapter 6 Running Power Console Plus
Cont'd
107