LSI SCSI 320-0 Configuration page 149

Event types Severity
Level
Informational
Battery Warning
temperature out of
Informational
range or back to
normal
Battery Voltage Warning
low or normal
Informational
Battery fast Warning
charging in
Warning
progress/failed/
Informational
completed
Number of battery Informational
charge cycles
Since the monitor Warning
program
Warning
scans the bus
periodically, it
checks for devices
and compares with
the previous
results. If not a
match, it logs
messages.
Log Messages
Battery Backup/Pack present
Battery Temperature OUT OF RANGE
Battery Temperature GOOD
Battery Voltage LOW
Battery Voltage GOOD
Battery Fast Charging IN PROGRESS
Battery Fast Charging FAILED
Battery Fast Charging COMPLETED
"No of Charge Cycles = ??"
Physical drive is Removed/Powered Off
Physical drive is Added/Powered On
The Power On/Off feature is not implemented in the
current version because the monitor program only
scans the bus once at the beginning of program
execution. It cannot detect later device changes.
Appendix A MegaRAID Service Monitor
Cont'd
141