LSI SCSI 320-0 Configuration page 80

Using Easy Configuration,
Step
7 When you are finished defining the current logical drive, select Accept and press <Enter>.
The array selection screen appears if any unconfigured disk drives remain.
8 Repeat steps 3 through 7 to configure another array and logical drive. If you are finished
configuring logical drives, press <Esc> to exit Easy Configuration. A list of the currently
configured logical drives appears:
After you respond to the Save prompt, the Configure menu appears.
9 Initialize the logical drives you have just configured. See Initializing Logical Drives on
page 79.
MegaRAID Configuration Software Guide
72
Continued
Action