LSI SCSI 320-0 Configuration page 119

Adapter Menu,
Continued
Properties Select this option to display the adapter properties. A screen like the following
appears:
Rebuild Rate Choose Rebuild Rate to select the amount of system resources to be devoted to
rebuilding failed disk drives. The higher the percentage of system resources
devoted to drive rebuilds, the lower the percentage of system resources devoted
to RAID operations and the more degraded the system will become. The
following screen appears. Click on the slider to select the percentage of system
resources to devote to the disk rebuild.
The higher the percentage, the more computing power is devoted to the rebuild.
Choose a low percentage to minimize system performance problems.
Choose this option to scan all SCSI channels again to update the status of all
Rescan
attached SCSI devices.
Chapter 6 Running Power Console Plus
Cont'd
111