Advertisement
•
type — The sampling method for the selected variable and calculating the value to be
compared against the thresholds. If the method is absolute, the value of the selected
variable is compared directly with the thresholds at the end of the sampling interval. If
the method is delta, the selected variable value at the last sample is subtracted from the
current value, and the difference compared with the thresholds.
•
direction — The alarm that may be sent when this entry is first set to valid. If the first
sample (after this entry becomes valid) is greater than or equal to the rthreshold, and
direction is equal to rising or rising-falling, then a single rising alarm is generated. If the
first sample (after this entry becomes valid) is less than or equal to the fthreshold, and
direction is equal to falling or rising-falling, then a single falling alarm is generated.
•
name — Enter a name that specifies who configured this alarm. If unspecified, the name
is an empty string.
Default Configuration
The following parameters have the following default values:
•
type — If unspecified, the type is absolute.
•
direction — If unspecified, the startup direction is rising-falling.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
•
Alarm index — 1000
•
Variable identifier — dell
•
Sample interval — 360000 seconds
•
Rising threshold — 1000000
•
Falling threshold — 1000000
•
Rising threshold event index — 10
•
Falling threshold event index — 20
console(config)# rmon alarm 1000 dell 360000 1000000 1000000 10 20
show rmon alarm-table
The show rmon alarm-table User EXEC mode command displays the alarms summary table.
211
RMON Commands
Advertisement
