Advertisement
Example
The following example assigns WRR weights to egress queues.
console(config)# priority-queue out num-of-queues 1
console(config)# wrr-queue bandwidth 20 30 50
console(config)# priority-queue out num-of-queues 0
console(config)# wrr-queue bandwidth 20 30 50 10
priority-queue out num-of-queues
The priority-queue out num-of-queues Global Configuration mode command enables the egress
queues to be SP queues. Use the no form of this command to return to the default values.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
•
number-of-queues — Assign the number of queues to be SP queues. The SP queues
would be the queues with higher indexes. (Range: 0 - 4)
Default Configuration
All queues are SP queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the priority-queue out num-of-queues command, the weighted round
•
robin (WRR) weight ratios are deleted.
•
Queue 4 is taken as the highest index queue. Queue 3 is taken as the next highest queue. If
two priority queues are selected then queue 4 and 3 will be used, leaving queue 2 and 1 for
WRR.
Example
The following example sets queue 4, 3 to be SP queues.
console(config)# priority-queue out num-of-queues 2
190
QoS Commands
Advertisement
