Configuring Set Parameters For The Netware Traditional File System; Section 7.4, "Configuring Set Parameters For The Netware Traditional File System - Novell Open Enterprise Server 2 System Administration Manual

Procedure
Use the "SET" command as described in the
After Write Verification parameter.
7.4 Configuring SET Parameters for the NetWare
Traditional File System
Table 7-1
parameters.
Table 7-1
SET Parameters for the Traditional File System
Volume Log File State
Volume TTS Log File State
Volume Log File Overflow Size
Volume TTS Log File Overflow Size
Auto TTS Backout Flag
TTS Abort Dump Flag
TTS UnWritten Cache Wait Time
TTS Backout File Truncation Wait Time
Dirty Directory Cache Delay Time
Directory Cache Allocation Wait Time
Directory Cache Buffer NonReferenced Delay
Maximum Directory Cache Buffers
Minimum Directory Cache Buffers
Maximum Number Of Internal Directory Handles
Maximum Number Of Directory Handles
Maximum Record Locks Per Connection
Maximum File Locks Per Connection
Maximum Record Locks
Maximum File Locks
Read Ahead Enabled
Read Ahead LRU Sitting Time Threshold
Minimum File Cache Buffers
Maximum Concurrent Disk Cache Writes
48 OES 2: NetWare Traditional File System Administration Guide
indicates the default settings in NetWare 6.5 or later for the Traditional file system SET
SET Parameters for a Traditional File System Volume
OES 2: Utilities Reference to disable the Disk Read
Default Value
1
1
4194304
4194304
On
Off
1 minute 5.9 seconds
59 minutes 19.2 seconds
0.5 seconds
2.2 seconds
5.5 seconds
2000
500
100
20
500
2500
20000
200000
On
10 seconds
20
750