Figure 11
Turning Off IPX Packet Forwarding on a NetWare File Server
IPX
Internetwork
NetWare
Workstation
How to Turn Off IPX Packet Forwarding
52
Internetwork Packet Exchange
NetWare
Router
Routed Traffic
IPX
Internetwork
Workstation
File Services
NetWare
File Server
Packet Forwarding = Disabled
You should turn off IPX packet forwarding if you do not want the server to
forward IPX packets between its interfaces.
For more information about IPX routing and related topics, refer to
"Understanding," on page
print services, refer to your NetWare documentation.
Before you begin, you must have at least two NetWare servers, or one
NetWare server and a dedicated router on the same IPX network.
To turn off IPX packet forwarding, complete the following steps:
1
Load NIASCFG, then select the following parameter path:
Select Configure NIAS > Protocols and Routing > Protocols > IPX
2
The Packet Forwarding parameter is already highlighted; select it, then
select Disabled .
Internetwork
NetWare
11. For more information about NetWare file and
IPX
NetWare
Workstation
Chapter 1,