Novell GROUPWISE 7 - TROUBLESHOOTING 2 Troubleshooting Manual page 39

MTA Starts in the Wrong Language
Problem: You have installed the MTA in more than one language and it is starting in a
different language than you want.
Action: Start the MTA using the
MTA Is Involved with Network Operating System or Hardware Problems
Problem: The MTA is interacting with the network operating system or hardware in an
undesirable way.
Possible Cause: If you just updated the MTA software, you might not have unloaded the agent
engine (gwenn5.nlm), resulting in a series of Loader cannot find
public symbol: symbol errors on the server console.
Action: Unload gwenn5.nlm, then start the MTA, so that the newly installed agent
engine is loaded along with it.
Possible Cause: The MTA server is running older software, resulting in TCP_HANDLER
errors on the server console.
Action: Make sure you are using the most current TCP/IP stack for NetWare.
Possible Cause: The MTA server is overburdened, resulting in SYN attacks.
Action: Make sure overall server utilization is not too high. Increase the MTA's
tolerance for slow connections. See
Slow TCP/IP
Administration
/language switch to specify the language.
"Adjusting the MTA Wait Intervals for
Connections" in "Message Transfer
Guide.
Agent" in the GroupWise 7
Message Transfer Agent Problems 39