Simrad ES70 - REFERENCE MANUAL REV A Reference Manual page 176

Simrad ES70
* Simrad EM Attitude 3000 on page 197
– : This is input from a speed log.
Speed Log
The following telegram formats are supported:
* RMC Recommended minimum specific GNSS data on page 193
* VHW Water speed and heading on page 194
* VTG Course over ground & ground speed on page 194
– : This is input from the Simrad ITI catch monitoring system.
ITI
The following telegram formats are supported:
* DBS Depth below surface on page 190
* DBS Depth of trawl below surface on page 198
* HFB Trawl headrope to footrope and bottom on page 199
– : This is input from the Simrad PI44, PI54 and PI50 catch monitoring systems.
PI50
The following telegram formats are supported:
* DBS Depth below surface on page 190
* PSIMP.D PI Sensor data on page 199
– : This is input from a peripheral system providing information about
DistanceLog
sailed distance.
The following telegram formats are supported:
* RMC Recommended minimum specific GNSS data on page 193
* VHW Water speed and heading on page 194
* VTG Course over ground & ground speed on page 194
– : This is input from a peripheral system providing annotations.
Annotation
The following telegram formats are supported:
* Simrad ATS Annotation on page 202
– : This is input from a peripheral system providing heading information.
Gyro
The following telegram formats are supported:
* HDG Heading, deviation and variation on page 192
* HDT Heading, true on page 193
* HDM Heading, magnetic on page 192
* VHW Water speed and heading on page 194
• : This field lists the selected input signals to the relevant
Selected Inputs
communication port.
• : Some of the inputs may be set up by the ES70. To do this, click
Configure Input
on the input name, and then this button. When applicable, the relevant setup dialog
will open.
Related topics
• Navigation on page 140
• Trawl on page 145
174
338106/A