Annotations - Simrad ES70 - REFERENCE MANUAL REV A Reference Manual

•
Synchronization delay
chosen mode.
– Stand-alone: Not used.
– Slave: The system will wait for the delay time after the external trigger signal has
arrived before transmitting the ping. (Post-trigger)
– Master: The system will wait for the delay time after the external trigger signal
has been sent to the slaves before transmitting the ping. (Pre-trigger)
Note that this delay will only work when the synchronization is set up using
a serial port.
•
Synchronization port
synchronization signals.
You can select one of the following ports:
– None
– Serial Port 1
– GPT Auxiliary Port

Annotations

The dialog is opened from the
Annotation
Purpose
The purpose of the
Annotation
into the echograms.
338106/A
: This delay parameter is used differently depending on the
: This is the interface port currently used to transmit or receive
Annotation
dialog is to allow you to enter comments and annotations
Functions and dialogs
button on the menu.
Setup
137