Simrad ES70 - REFERENCE MANUAL REV A Reference Manual page 161

Description
The dialog is the main source for all echogram presentation choices. The
Echogram
dialog is provided with three tabs to set up the parameters.
• The tab allows you to set up the appearance of the bottom line, horizontal
Lines
information lines, scale, distance or time markers, and annotations.
• The tab allows you to set up the echogram type and the TVG.
Echogram
• The
Horizontal Axis
Related topics
• Lines, markers and annotations in the echograms on page 47
• How to select echogram presentation on page 70
• How to establish horizontal markers on page 71
• How to establish vertical markers on page 72
• How to select TVG gain on page 73
About TVG gain on page 205
•
• How to easier identify the bottom on page 74
• About bottom lines on page 211
• How to monitor the current biomass on page 78
• Annotations on page 137
Echogram; Lines tab
338106/A
tab allows you to set up the horizontal scale of the echogram.
The
Lines
to change the appearance of the bottom line. You
can add an extra bottom line, and in addition
to this you can enable either a white line or a
hardness indicator line. The tab offers several
horizontal information lines, and you can choose
the vertical scale of the echogram. Finally, the
tab offers time or distance markers, and you
Lines
can enable annotations.
Note that the changes made in this tab will be
default only be applied to the currently selected
"active" echogram (identified with a thick border).
If you wish to apply the changes to all the other
echograms of the same type (for example all
bottom related echograms, click
Functions and dialogs
tab in the dialog allows you
Echogram
.
Apply To All
159