How To Play Back Echogram Sequences - Simrad ES70 - REFERENCE MANUAL REV A Reference Manual

a On the
Directory
b On the
Raw Data
Raw data are the echo data received directly from the output of the transceiver.
The data can later be replayed on the ES70. The data contain sample data, echo
sounder configuration data, navigation data (NMEA format) and annotations
(if any).
c Define any other parameters to fit your requirements.
→ File Output on page 178
5 Click to save the current settings and close the dialog.
OK
6 To start recording, you have two choices:
In the
a
Record
On the
b
Title Bar
When activated, the
→ Operation buttons on page 37
7 To stop recording, you have two choices:
a In the
Record
b On the
Title Bar
When not activated, the
→ Operation buttons on page 37

How to play back echogram sequences

You can save echograms i two ways. Bitmap images are saved continuously, and these
can be recalled by means of the
sequences are recorded using the
sequences are played back by placing the ES70 in Replay mode.
1 Click the
Operation
2 Click the
Operation
338106/A
tab, define the file output directory.
tab, click
Save Raw Data
button, select On.
, click the button.
Record
button is red.
Record
button, select Off.
, click the button.
Record
button is black.
Record
Screen Capture
function on the
Record
icon under the
Main
button to open its sub-menu.
Operational procedures
to enable this export.
button on the
Taskbar
Operation
menu to open the
Operation
. Echogram
menu. These
sub-menu.
67