Information Pane Icons - Simrad ES70 - REFERENCE MANUAL REV A Reference Manual

Simrad ES70
The recording function is set up using the parameters available on the
on the menu.
Operation
→ How to save raw echogram data on page 66
→ Record on page 123

Information pane icons

The Simrad ES70 offers several information panes to provide additional and detailed
data from the echogram. The panes are opened and closed using the pane buttons on
the .
Title Bar
In order to open an information pane, you must first click in an echogram presentation to
make it "active". By doing this you select frequency channel (transducer). In most cases,
the data in the information pane you open will only be valid for the selected echogram.
Note
Some of the information panes are optional. They are thus not available for use unless a
licence code is available. In order to obtain a licence, consult your local dealer.
Depth
Click this button to open and close the
current depth as measured by the selected transducer.
→ Depth information pane on page 51
Biomass
Click this button to open and close the
current biomass as calculated by the echo sounder based on the current echogram.
→ Biomass information pane on page 51
Bottom Hardness
1. Biomass is an optional function. In order to activate the
licence.
38
information pane. This pane provides the
Depth
information pane. This pane provides the
Biomass
information pane, you must obtain a
Biomass
button
Record
[1]
338106/A