Single Target Detection - Simrad ES70 - REFERENCE MANUAL REV A Reference Manual

Parameters
•
Start Relative Surface
is surface related.
The start depth for the echogram shown on the display is defined by the
parameter on the
Main
→ Start Range on page 114
→ Echogram on page 158
• : This parameter controls the depth range.
Range
The range for the echogram shown on the display is defined by the
on the menu.
Main
→ Range on page 113
• : Check this box to apply the new range setting to all current echograms
Apply to all
of the same type.
Example: If you have selected a bottom echogram when you changed the range
setting, the setting will also be applied to all the other bottom echograms. A similar
functionality applies to the other echogram types.
Related topics
• Range on page 113
• Start Range on page 114
• Echogram on page 158
• EK500 Datagram on page 181

Single Target Detection

The
Single Target Detection
dialog.
EK500 Datagram
338106/A
Description
The parameters defined in this dialog are only
implemented for surface related echogram data
exported by the ES70. Similar parameters for the
echogram view are defined by the
buttons on the
Range
: This parameter controls the start depth when the echogram
menu. The echogram type is selected in the
dialog is opened from the
Functions and dialogs
Range
menu.
Main
Echogram
Range
button in the
Echo Trace Setup
and
Start
Start Range
dialog.
parameters
185