Ethernet Output - Simrad ES70 - REFERENCE MANUAL REV A Reference Manual

Simrad ES70
Related topics
• I/O Setup on page 150
• Navigation; Distance tab on page 143

Ethernet Output

The dialog is opened from the
Ethernet Output
Purpose
The purpose of the
Ethernet Output
EK500 datagram output on the Ethernet port.
Tip
If you wish to send data to the
communication parameters in the documentation provided with the
Parameters
• : Click this box to enable or disable the EK500 datagram output.
Output EK500
Note
In order to disable EK500 datagram output, you must also open the
dialog and clear all data format check boxes.
→ EK500 Datagram on page 181
• : Click the button to open the
EK500 Datagram
you can set up the individual datagrams to be exported.
→ EK500 Datagram on page 181
146
Ethernet Output
dialog is define communication parameters for the
Description
To support programs which use data from
the Simrad EK500 echo sounder, the ES70
can output a subset of the EK500 defined
datagrams. This dialog allows you to enable
or disable the EK500 datagram output
to the Ethernet port. This output port is
not managed by the
handled separately from this dialog.
system, use
Olex Remote port
EK500 Datagram
button on the menu.
Setup
dialog, but
I/O Setup
= 2020. Verify the
system.
Olex
EK500 Datagram
dialog. In this dialog,
338106/A