Egress Queue Scheduling Settings - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Parameter
DSCP Mapping
Click Apply to submit the changes.
Parameter
Type00~63
Click Type0-15, 16-31, 32-47, 48-63 to configure queue mapping for corresponding DSCP levels.
Click Apply to submit the changes.

Egress Queue Scheduling Settings

This page is to configure the scheduling algorithm for switch queues.
Parameter
Scheduling Algorithm
Click Apply to submit the changes.
8-4
Figure 76 – QoS > DSCP
Description
To enable the DSCP queue mapping. When disabled, Switch will map queue
with 802.1p priority.
Description
Specify which switch queue to map. The options are Class-0, Class-1,
Class-2 and Class-3.
Figure 77 – QoS > Egress Algorithm
Description
Select the algorithm of queue scheduling. The options are:
Strict Priority - The traffic in highest queue always process first.
Weighted RoundRobin - Using weighted round-robin algorithm to handle
packets in priority queues.
Default is Strict Priority.