Switchport Ingress-Filter; Switchport Pvid - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
Example
Command History

switchport ingress-filter

Command
Default Settings
Command Modes
User Guidelines
Example
Command History

switchport pvid

Command
26-2
all
tagged
untaggedAndPrioritytagged
all
Interface Configuration Mode
switch(config-if)# switchport acceptable-frame-type tagged
Version History
1.00.001 This command was introduced
To filter all ingress packets which do not carry the same VLAN tag with the VLAN
membership of the port.
switchport ingress-filter
no switchport ingress-filter
Disable
Interface Configuration Mode
Using no form to disable the ingress filtering of the port
switch(config-if)# switchport ingress-filter
Version History
1.00.001 This command was introduced
To set the port VLAN ID of the port, all ingress untagged or priority tagged packet
from this port will be assign to this VLAN.
switchport pvid <vlan-id(1-4094)>
no switchport pvid
Accepts all kinds of frames.
Accepts only tagged frames
Accepts only untagged frames and frames
with priority tag.