Rmon Events Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Interval
Variable
Sample type
Rising Threshold
Falling Threshold
Rising Event Index
Falling Event Index
Owner
Status
Click Apply to submit the changes.

RMON Events Configuration

This page is to add an event to RMON event table.
Parameter
Index (1~65535)
Description
Type
Community
Owner
Click Add to create a new RMON event, Reset to clear the value.
Parameter
Index
Description
Type
9-8
The time interval in seconds that alarm monitors the MIB variable.
The MIB OID of this alarm entry.
The type of the alarm sampling. The options are:
Absolute value - To test the MIB variable directly.
Delta value - To test the change between samples of a MIB variable.
The threshold value to trigger alarm when the number of sample exceeds.
The threshold value to reset alarm when the number of sample exceeds.
The number of event to trigger when rising threshold is exceeded.
The number of event to trigger when falling threshold is exceeded.
Specify the owner of the alarm entry.
Specify the status of this alarm entry. The options are:
Valid - The alarm entry is valid.
Under Creation -
Invalid - The alarm entry is invalid and will be deleted.
Figure 82 – RMON > Events
Description
Specify the index of the RMON event.
Specify the description of the event.
Specify the action type of the event. The options are:
Log - Generating syslog when event is triggered.
SNMP Trap - Generating a trap message when event is triggered.
Log and Trap - Generating both log and trap message when event is
triggered.
Specify the SNMP community string used for the traps.
Specify the owner of the event entry.
Description
Specify the index of the RMON event.
Specify the description of the event.
Specify the action type of the event. The options are:
Log - Generating syslog when event is triggered.