Chapter 40 Qos Command; Qos Command List; Set Dscp; Vlan Map-Priority - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

QoS Command List

set dscp

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

vlan map-priority

Command
40-1

set dscp

vlan map-priority

dscp map-type

cosq scheduling algorithm

switchport priority default

show vlan traffic-classes

show vlan port config

show dscp

show cosq algorithm
To configure the priority and switch queue mapping
set dscp { enable | disable }
Enables DSCP and queue mapping.
enable
Disables DSCP and queue mapping.
disable
Disable
Global Configuration Mode
When DSCP is disabled, Switch map queue with 802.1p priority.
switch(config)# set dscp enable
Version History
1.00.001 This command was introduced
To set the 802.1p priority and queue mapping.
vlan map-priority
<Traffic class value(0-3)>
QoS Command
<priority value(0-7)>
Chapter 40
traffic-class