Chapter 39 Storm Control Command; Storm Control Command List; Storm-Control Pkt-Type - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

Storm Control Command List

storm-control pkt-type

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
39-1
Storm Control Command

storm-control pkt-type
To enable and configure the details of the storm control function.
storm-control pkt-type { broadcast-only | multicast-broadcast
| dlf-multicast-broadcast
(64-1024000)>
no storm-control
broadcast-only
multicast-broadcast
dlf-multicast-broadcast
rate-level
rate-level(64-1024000)
Disable
Global Configuration Mode
The no form disables the storm control.
switch(config)# storm-control broadcast level 500
Version History
1.00.001 This command was introduced
Chapter 39
} rate-level
Only controls the broadcast packets.
Controls both broadcast and multicast packets.
Controls broadcast, multicast and Destination
Lookup Failed (DLF) unicast packets.
Specify the packet number all types above is
allowed to be forwarded per second.
<rate-level