Dot1X Default; Dot1X Max-Req - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

dot1x default

Command
Default Settings
Command Modes
Example
Command History

dot1x max-req

Command
Syntax Description
Default Settings
Command Modes
31-5
To configure 802.1X with default values on the port.
dot1x default
Per-interface 802.1X protocol enable state -
Periodic reauthentication
Number of seconds between
reauthentication attempts
Quiet period
Retransmission time
Maximum retransmission number
Client timeout period
TX period
Defaults authentication server timeout
period
Interface Configuration Mode
switch(config-if)# dot1x default
Version History
1.00.001 This command was introduced
To set the maximum 802.1X Extensible Authentication Protocol (EAP) retries of
the client before restarting authentication process.
dot1x max-req <count(1-10)>
no dot1x max-req
Specify the maximum number of retry.
count(1-10)
2 retries
Interface Configuration Mode
Enabled (force-authorized)
- Disabled
- 3600 seconds
- 60 seconds
- 30 seconds
- 2 times
- 30 seconds
- 30 seconds
- 30 seconds