Shutdown Dot1X - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

shutdown dot1x

Command
Default Settings
Command Modes
User Guidelines
Example
Command History
31-8
quiet-period
value (0-65535)
reauth-period
value (1-65535)
server-timeout
value (1-65535)
supp-timeout
value (1-65535)
tx-period value
(1-65535)
quiet-period -
reauth-period -
server-timeout -
supp-timeout -
tx-period -
Interface Configuration Mode
Using no form to reset the timers to default.
switch(config-if)# dot1x timeout quiet-period 120
Version History
1.00.001 This command was introduced
To shutdown the 802.1X authentication.
shutdown dot1x
no shutdown dot1x
Enable
Global Configuration Mode
Using no form to reactivate the 802.1X authentication.
switch(config)# shutdown dot1x
Version History
1.00.001 This command was introduced
The period that Switch will not do anything after a failed
authentication.
The period between re-authentication attempts.
The period that Switch waits for the re-transmission to the
RADIUS server.
The period that Switch waits for the re-transmission to the
client.
The period that Switch waits for a response to an
EAP-request/identity frame from the client before
retransmitting the request.
60 seconds
3600 seconds
30 seconds
30 seconds
30 seconds