P Port Priority; Dscp Queue Mapping - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Parameter
Priority 0~7
Click Apply to submit the changes.

802.1p Port Priority

This page is to configure the 802.1p priority for untagged packets receive from each port.
Parameter
Select
Port
User Priority
Click Apply to submit the changes.
Click 1-12, 13-24 to configure port priority for corresponding ports.

DSCP Queue Mapping

This page is to enable/configure the DSCP and queue mapping.
8-3
Description
Specify which switch queue to map. The options are Class-0, Class-1,
Class-2 and Class-3.
Figure 75 – QoS > Port Priority
Description
Select a port to submit the configuration changes.
Port ID.
Specify 802.1p priority of untagged packets.