Ping - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Syntax Description
Command Modes
Example
Command History

ping

Command
Syntax Description
Default Settings
Command Modes
Example
Command History
43-2
copy { tftp://ip-address/filename
filename}{ tftp://ip-address/filename | flash: filename}
tftp://ip-address/filename
flash: filename
tftp://ip-address/filename
flash: filename
Privileged EXEC Mode
switch# copy tftp://172.17.0.100/syslog1 flash:backuplog
Version History
1.00.001 This command was introduced
Sending out ICMP echo request to verify a specific IP address is available.
ping [ ip ] <destination-address> [size <packet_size (0-2080)>]
[count <packet_count (1-10)>] [timeout <time_out (1-100)>]
ip destination-address
size packet_size (0-2080)
count packet_count (1-10)
timeout time_out (1-100)
Packet count: 3
Timeout: 5
Privileged EXEC Mode
switch# ping ip 192.168.0.2 size 2080
Reply Received From :192.168.0.2, TimeTaken : 10 msecs
Reply Received From :192.168.0.2, TimeTaken : 20 msecs
Reply Received From :192.168.0.2, TimeTaken : 20 msecs
--- 192.168.0.2 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
Version History
1.00.001 This command was introduced
The IP address the remote tftp server and the
filename you would like to copy from.
The path and filename of the local file you
would like to copy from.
The IP address the remote tftp server and the
file name to be saved.
The path and filename you would like to
saved in local flash
Specify which IP address to send echo request.
Specify the size of ping packet to send.
Specify how mand echo request to send.
Specify the timeout in seconds to wait each
ICMP echo reply.
| flash: