Mstp Timers Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Parameter
System Control
MSTP Status
Maximum MSTP
Instances
Bridge Priority
Protocol Version
Region Name
Region Version
Dynamic Path Cost
Calculation
Click Apply to submit the changes.
Note

MSTP Timers Configuration

This page is to configure the MSTP timers of the Switch.
Parameter
Maximum Hop Count
Max Age
6-9
Figure 38 – Layer2 Management > MSTP > Global Configuration
Description
To activate or shutdown the MSTP function. Select Start to activate the MSTP
function, Shutdown to shutdown MSTP function.
To enable or disable the MSTP. Select Enabled to enable the MSTP function,
Disabled to disable the MSTP function.
Specify the maximum number of MSTP instance allowed. The possible
number is 1-64. Default is 64.
Specify the bridge priority of spanning tree. Default is 32768.
Select the spanning tree compatibility version. The possible options are STP,
RSTP and MSTP. Default is RSTP.
Specify the region name of MST.
Specify the MST region revision. The possible numbers are 0~65535, default
is 0.
Select the path cost calculation mode of spanning tree. Select True to enable
dynamic path cost according to the port speed, False to disable it. Default if
False.
1. RSTP function must be shutdown before activate MSTP.
2. MSTP status must be enabled before configure other MSTP details.
Figure 39 – Layer2 Management > MSTP > Timers Configuration
Description
Specify the maximum hops permitted in MST. Possible value is 6-40. Default
is 20.
Specify the maximum age in second for STP information learned from the
network on any port before it is discarded. The possible value is 6-40. Default