Debug Ssh - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
User Guidelines
a
Example
Command History

debug ssh

Command
18-2
version
compatibility
cipher
([des-cbc]
[3des-cbc])
auth
([hmac-md5]
[hmac-sha1])
Version: 2
Cipher: 3DES-CBC
Authentication: HMAC-SHA1
Global Configuration Mode
When set version compatibility, both SSH version-1 and SSH version-2 will be
supported.
switch(config)# ip ssh version compatibility
Version History
1.00.001 This command was introduced
To enable the trace level messages of SSH. The no format will reset all settings.
debug ssh {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer] [server]}
no debug ssh {all | [shut] [mgmt] [data] [ctrl] [dump] [resource]
[failall] [buffer] [server]}
The supported version of SSH.
To configure SSH Cipher algorithm. User can choose from
DES (Data Encryption Standard) or 3DES (Triple_Data
Encryption Standard) encryption algorithm in CBC (Cipher
Blocking Chain) mode.
To configure authentication encryption algorithm. User can
choose two different Hash-based Message Authentication
Codes (HMAC): MD5 (Message-Digest algorithm 5) or
SHA1 (Secure Hash Algorithm).