Show Interface Mtu - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Command Modes
User Guidelines
Example
Command History

show interface mtu

44-3
interface-type
interface-id
description
flowcontrol
capabilities
status
port-channel
port-channel-id
(1-65535)
Privileged EXEC Mode
System will display information of all interfaces when executing the command
without given parameters.
switch# show interface fa 0/5 description
Interface Status
--------- ------
Fa0/5 up
switch# show interface fa 0/5 flowcontrol
Port Tx FlowControl
---- --------------
Fa0/5 off
switch# show interface fa 0/5 capabilities
Fa0/5
Type : 10/100/1000 Base TX
Speed : 10, 100, 1000, Auto
Duplex : Half, Full
FlowControl : Send, Receive
switch# show interface fa 0/5 status
Port Status
---- ------
Fa0/5 connected
Copper
Version History
1.00.001 This command was introduced.
To display the MTU setting of the interface.
Specify the information of which interface to display.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Display the link status and protocol status of the interface
Display the flow control setting and pause frame statistic
of the interface
Display the capabilities of the interface
Display the current status of the interface
Port channel ID
Protocol
--------
up
Rx FlowControl
-------------
off
Duplex
------
Full
Tx Pause
--------
0 0
Speed Negotiation
----- -----------
100 Mbps
Rx Pause
--------
Auto